CONTINUOUS CORROSION MONITOR
Applications
  • Sour gas lines
  • Amine treatment plants
  • HF alkylation units
  • Desulfurisation units
  • CDU outlets and heat exchangers
  • Cracking unit overheads
  • Amine Corrosion monitoring
  • Desulphurisation Units Monitoring
  • Feedstock optimisation
  • HF Corrosion monitoring
  • High temperature acid corrosion monitoring
  • Naphthenic acid corrosion monitoring
  • Refinery Overheads Monitoring
  • Sour Corrosion Monitoring
  • Sub-ground headspace monitoring
Description
Hydrosteel® 7000TL - Lightweight, Battery Operated Corrosion Monitor


Hydrosteel 7000TL transportable lightweight corrosion monitor 
Hydrosteel 7000 Transportable Light (TL) is a newly developed lightweight corrosion monitor for the non-intrusive continuous measurement of hydrogen flux.

A complete stand-alone battery operated kit, Hydrosteel 7000TL weighs just 8 kg, 15 lb. The lightweight instrument has been designed for easy installation at the top of tall refinery towers and columns and enables monitoring for up to 9 months, depending on the user defined data sampling period.

A major benefit is its ability to monitor active corrosion and hydrogen risk damage, non-intrusively. This is particularly useful for sour, HF and high temperature corrosion events which occur over timescales of days, weeks and months.

Highly accurate, the Hydrosteel 7000 TL corrosion monitor provides the most sensitive, precise hydrogen flux measurements available. Hydrosteel 7000 TL operates without any human intervention, and responds to corrosion changes within minutes.

Developed for the continuous monitoring of hydrogen activity, Hydrosteel 7000 TL is used within critical refinery sites suffering from sour corrosion and risk of hydrogen damage. Target industries for Hydrosteel 7000 TL include refineries, gas plants, gas oil separation plants and chemical industries using petrochemicals containing sour gas, and ammonia production


Features
  • Continuous, non intrusive measurement of active corrosion and hydrogen risk damage
  • Responds to corrosion changes in minutes
  • Provides the most sensitive, precise hydrogen flux measurements available
  • No explosion proof box required or bespoke probe fittings required
  • Operates on one battery charge for up to 9 months without human intervention
  • Measurements stored internally
  • Data download to PC via RS-232
  • Low-maintenance, labour friendly
  • Light Weight (4kg) Battery
  • Designed for easy installation and relocation

Applications
  • Sour gas lines
  • Amine treatment plants
  • HF alkylation units
  • Desulfurisation units
  • CDU outlets and heat exchangers
  • Cracking unit overheads
  • Amine Corrosion monitoring
  • Desulphurisation Units Monitoring
  • Feedstock optimisation
  • HF Corrosion monitoring
  • High temperature acid corrosion monitoring
  • Naphthenic acid corrosion monitoring
  • Refinery Overheads Monitoring
  • Sour Corrosion Monitoring
  • Sub-ground headspace monitoring




Hydrosteel® 6000 - Fast, Reliable Hydrogen Flux Spot Measurement


Hydrosteel 6000 handheld corrosion monitor 
The Hydrosteel 6000 hydrogen flux monitor is the ultimate portable tool for sour HF and high temperature corrosion and diffusible hydrogen damage in steel.

The intrinsically safe hydrogen flux monitor is totally non-intrusive and requires minimal test surface preparation. Consumables such as grease are not needed and reliable measurements can be made within a minute.

Measurements can be taken from small pipes and large vessels at any orientation and any temperature up to 500 °C (932 °F) with a single probe.


Features
  • Rapid, reliable and repeatable measurement of hydrogen flux
  • Operates on steel up to 500 °C
  • Accommodates surfaces from 3.5" diameter to flat
  • Operates in any orientation, e.g. at base of pipe and vessels where corrosion commonly occurs
  • Portable, light-weight
  • Simple to use
  • Intrinsically safe
  • Totally non-intrusive
  • Little or no test surface preparation needed
  • No consumables such as adhesives, liquids or greases required

Applications
  • Measurement of active corrosion in steel pipes and vessels in petrochemical service at temperatures up to 500 °C
  • Hydrogen monitoring for industrial bake out
  • Identification of corrosion hot spots
  • Optimisation of corrosion control measures and inhibitor programs
  • HIC damage identification, assessment and control
  • Sour, HF acid and all high temperature corrosion monitoring
  • Risk based inspection of prospective hydrogen damage
  • Integrity testing of internal protective coatings
  • Optimisation of hydrogen bake outs and controlled cooling of large scale vessels
  • Amine Corrosion monitoring
  • Desulphurisation Units Monitoring
  • Feedstock optimisation
  • HF Corrosion monitoring
  • High temperature acid corrosion monitoring
  • Hydrogen bakeout monitoring
  • Naphthenic acid corrosion monitoring
  • Refinery Overheads Monitoring
  • Sour Corrosion Monitoring
  • Sub-ground headspace monitoring
  • Sulfidic corrosion monitoring